2017-2020年在湖北荆州采用有限元分析方法获得的钻机设计计算报告3份。计算内容包括钻机结构强度和稳定性计算，绞车主要参数和主滚筒强度计算，钻台保温区、钻台下区域、固控及辅助区热平衡计算，计算结果表明钻机设计方案满足-50℃环境温度和12000m井深要求。另外，此数据集内容包含了转速、额定转速、功率、频率、大钩速度、大钩负荷、室外风速、室外温度、长度、面积、重量、修正重量、规范、横向载荷等。
", "ds_source": "本数据集为通过有限元分析软件计算获得。数据采集地点为湖北荆州中石化四机石油机械有限公司，采集所用软件为SAFI PSE V12.0.2 、Fluent V19.2、Solidworks simulation V2013。
", "ds_process_way": "采用SAFI PSE V12.0.2 、Fluent V19.2、Solidworks simulation V2013等软件分析。计算与评价参考标准API 4F、ANSI/AISC 360、GB/T23505等。
", "ds_quality": "数据质量良好。
", "ds_acq_start_time": "2017-01-01 00:00:00", "ds_acq_end_time": "2020-12-30 00:00:00", "ds_acq_place": "湖北荆州中石化四机石油机械有限公司", "ds_acq_lon_east": null, "ds_acq_lat_south": null, "ds_acq_lon_west": null, "ds_acq_lat_north": null, "ds_acq_alt_low": null, "ds_acq_alt_high": null, "ds_share_type": "login-access", "ds_total_size": 2217080, "ds_files_count": 5, "ds_format": "word", "ds_space_res": null, "ds_time_res": "年", "ds_coordinate": "无", "ds_projection": "", "ds_thumbnail": "56cdf4d4-c154-4b01-bfc3-52a0919b0454.png", "ds_thumb_from": 2, "ds_ref_way": "", "paper_ref_way": "", "ds_ref_instruction": "", "ds_from_station": null, "organization_id": "aaf309a1-cdf4-4049-be08-c06f80c4061f", "ds_serv_man": "敏玉芳", "ds_serv_phone": "0931-4967596", "ds_serv_mail": "ncdc@lzb.ac.cn", "doi_value": "10.12072/ncdc.SRIPE.db1699.2022", "subject_codes": [ "170.50" ], "quality_level": 3, "publish_time": "2022-02-25 14:46:49", "last_updated": "2025-05-29 11:37:06", "protected": false, "protected_to": null, "lang": "zh", "cstr": "11738.11.ncdc.SRIPE.db1699.2022", "license": null, "i18n": { "en": { "title": "Rig design calculation data set (2017-2020)", "ds_format": "word", "ds_source": "This dataset was obtained through finite element analysis software calculations. The data collection location is Sinopec Siji Petroleum Machinery Co., Ltd. in Jingzhou, Hubei Province, and the software used for the collection is SAFI PSE V12.0.2 、Fluent V19.2、Solidworks simulation V2013。
", "ds_quality": "The data quality is good.
", "ds_ref_way": "", "ds_abstract": "Three drilling rig design calculation reports obtained using finite element analysis method in Jingzhou, Hubei from 2017 to 2020. The calculation content includes the strength and stability calculation of the drilling rig structure, the calculation of the main parameters of the winch and the strength of the main drum, the thermal balance calculation of the insulation area, lower area, solid control and auxiliary area of the drilling rig. The calculation results show that the drilling rig design scheme meets the requirements of -50 ℃ ambient temperature and 12000m well depth. In addition, this dataset includes speed, rated speed, power, frequency, hook speed, hook load, outdoor wind speed, outdoor temperature, length, area, weight, corrected weight, specifications, lateral load, etc.
", "ds_time_res": "年", "ds_acq_place": "Hubei Jingzhou Sinopec Siji Petroleum Machinery Co., Ltd", "ds_space_res": "", "ds_projection": "", "ds_process_way": "Analyze using software such as SAFI PSE V12.0.2, Fluent V19.2, Solidworks simulation V2013, etc. Calculation and evaluation reference standards include API 4F, ANSI/AISC 360, GB/T23505, etc.
", "ds_ref_instruction": "" } }, "submit_center_id": "ncdc", "data_level": 0, "license_type": "CC BY 4.0", "ds_topic_tags": [ "有限元分析", "钻机结构", "绞车", "热平衡" ], "ds_subject_tags": [ "地质学" ], "ds_class_tags": [], "ds_locus_tags": [ "湖北省荆州市" ], "ds_time_tags": [ 2017, 2018, 2019, 2020 ], "ds_contributors": [ { "true_name": "池胜高", "email": "chisg.oset@sinopec.com", "work_for": "中石化石油机械股份有限公司", "country": "中国" } ], "ds_meta_authors": [ { "true_name": "吴刚", "email": "wugang.oset@sinopec.com", "work_for": "中石化石油机械股份有限公司 ", "country": "中国" } ], "ds_managers": [ { "true_name": "吴刚", "email": "wugang.oset@sinopec.com", "work_for": "中石化石油机械股份有限公司 ", "country": "中国" } ], "category": "其他" }