    *************************************************************
                               Scoops3D
          3D Slope Stability Throughout a Digital Landscape
                        U.S. Geological Survey
                             Version: 1.0                                               
    *************************************************************


This file: A_emb20_output/A_emb20_out.txt                                                                                                                                                                                              

Start date and time: 03/13/2015  16:57:08
Description: Scoops3D example A (Arai and Tagyo 1985 example1) homogeneous material properties                                       

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I. INPUT FILES:
  DEM file: input/emb20DEM.asc                                                                                                                                                                                                          
  Main parameter input file: A_emb20.scp                                                                                                                                                                                             

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
II. SIMULATION PARAMETERS:
------------
DEM
Input file for topography: input/emb20DEM.asc                                                                                                                                                                                                          
  Dimensions of DEM grid (x,y):                                      133   133
  Number of cells in DEM grid:                                           17689
  Number of non-null cells in DEM grid:                                  17689
  Horizontal resolution of DEM grid (m ):                                 0.50
  Minimum elevation of DEM (m ):                                        15.000
  Maximum elevation of DEM (m ):                                        35.000
  xllcorner and yllcorner (m ):                           0.000          0.000
------------
UNIT DESCRIPTORS (used for labels in output files)
lengthunits   ceeunits    gammaunits
     m          kPa         kN/m^3  
------------
MATERIAL PROPERTIES
Property method:                                                         layer
Number of layers (nmat):                                                     1
                      total unit wt.  
lnum    cee     phi      gamt  
        kPa             kN/m^3  
  1     41.65  15.000   18.820 
------------
GROUNDWATER CONFIGURATION
Groundwater method (water):                                               None
------------
EARTHQUAKE LOADING
Horizontal pseudo-acceleration coefficient (dimensionless)(eq):          0.000
------------
LIMIT-EQUILIBRIUM METHOD
Analysis method (method):                                               Bishop
------------
SEARCH METHOD (srch)                                                       box
POTENTIAL FAILURE SIZE CONTROLS
Primary constraint, volume or area (vacriterion):                       Volume
Surface area is not a criterion for size restriction.
Volume range of potential failures (m ^3)(vmin, vmax):     1.000E+04 1.000E+05
Tolerance amount for initial potential failure (tol):                1.000E+03
Minimum number of active columns in potential failure required,
      otherwise error message generated (limcol):                          100
SLIP DIRECTIONS
Interval to search slip directions on each side of overall 
 fall direction of potential failure, in degrees (degmax):               0.000
Increment amount for slip direction, in degrees (deginc):                0.000
Calculated number of slip directions tested for each lattice node:           1
SEARCH-LATTICE EXTENT AND RESOLUTION
VERTICAL EXTENT AND RESOLUTION
Minimum elevation of search-lattice nodes (m ) (zsmin):                 35.000
Maximum elevation of search-lattice nodes (m ) (zsmax):                 70.000
Search-lattice vertical spacing (m ) (zsrchres):                         0.500
Increment amount for potential failure surface sphere radius(m )(dr):    0.500
HORIZONTAL EXTENT AND RESOLUTION
Starting search-lattice horizontal node (ismin,jsmin):                 30   67
Ending search-lattice horizontal node (ismax,jsmax):                  100   67
Horizontal spacing - multiple of DEM resolution (nsrchres):                  1
COARSE-TO-FINE SEARCH PARAMETERS
Horizontal and vertical multiplier for initial coarse search (multres):      4
Search iteration tolerance - percent change F (fostol):                 0.0100
------------
ADDITIONAL OUTPUT FILES AND PARAMETERS
Create new DEM file (remove):                                                M
   (surface with minimum F<foscut removed)
F cutoff for removing material from new DEM (foscut):                1.000E+01

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
III. OUTPUT FILES GENERATED: 

     LOCATION FOR OUTPUT FILES:
          A_emb20_output/                                                                                                                                                                                         

      A_emb20_out.txt
      A_emb20_errors_out.txt
      A_emb20_slope_out.asc
        Range: [    0.0000,   33.6901]
      A_emb20_fos3d_out.asc
        Range: [    1.5960,    1.9281]
      A_emb20_ordfos3d_out.asc
        Range: [    1.5341,    1.7048]
      A_emb20_fosvol_out.asc
        Range: [  1.4268E+04,  4.5439E+04]
      A_emb20_spheres_out.okc

     Optional files generated:
      A_emb20_newDEM_out.asc
        Range: [    12.3004,    35.0000]

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
IV. RESULTS:
Number of trial surfaces tried:                                           6560
F < foscut found and newDEM_out file created?                              yes
------------
3D POTENTIAL FAILURE - GLOBAL MINIMUM
Bishop's 3D factor of safety:                                           1.5960
Ordinary 3D factor of safety:                                           1.5381
Volume (m ^3):                                                     1.42683E+04
Horizontal surface area (m ^2):                                    1.92091E+03
Slip surface area (m ^2):                                          2.54584E+03
Weight (kg):                                                       2.68529E+05
Number of active columns:                                                 7771
        x-center         y-center          z-center     radius
         25.7500           33.2500           48.5000   3.61996E+01
Slip direction, relative to search lattice:                           180.0000
End date and time: 03/13/2015  16:57:41
