    *************************************************************
                               Scoops3D
          3D Slope Stability Throughout a Digital Landscape
                        U.S. Geological Survey
                             Version: 1.0                                               
    *************************************************************


This file: J_emb10nonhomogeq_output/J_emb10nonhomogeq_out.txt                                                                                                                                                                          

Start date and time: 03/13/2015  17:04:54
Description: Scoops3D example J (Donald and Giam example 1d) nonhomogeneous material properties (layers) with eq                     

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I. INPUT FILES:
  DEM file: input/emb10DEM.asc                                                                                                                                                                                                          
  Material layer file: input/emb10layer                                                                                                                                                                                                            
  Main parameter input file: J_emb10nonhomogeq.scp                                                                                                                                                                                   

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
II. SIMULATION PARAMETERS:
------------
DEM
Input file for topography: input/emb10DEM.asc                                                                                                                                                                                                          
  Dimensions of DEM grid (x,y):                                      102   101
  Number of cells in DEM grid:                                           10302
  Number of non-null cells in DEM grid:                                  10302
  Horizontal resolution of DEM grid (m ):                                 0.50
  Minimum elevation of DEM (m ):                                        25.000
  Maximum elevation of DEM (m ):                                        35.000
  xllcorner and yllcorner (m ):                           0.000          0.000
------------
UNIT DESCRIPTORS (used for labels in output files)
lengthunits   ceeunits    gammaunits
     m          kPa         kN/m^3  
------------
MATERIAL PROPERTIES
Property method:                                                         layer
Number of layers (nmat):                                                     3
                      total unit wt.  
lnum    cee     phi      gamt  
        kPa             kN/m^3  
  1      0.00  38.000   19.500 
  2      5.30  23.000   19.500 
  3      7.20  20.000   19.500 

Input file prefix for material layers: input/emb10layer                                                                                                                                                                                                            
  Layer #    1
    Number of non-null cells in layer:                                    8181
    Minimum bottom elevation (m ):                                   2.510E+01
    Maximum bottom elevation (m ):                                   3.100E+01
  Layer #    2
    Number of non-null cells in layer:                                    6161
    Minimum bottom elevation (m ):                                   2.400E+01
    Maximum bottom elevation (m ):                                   2.688E+01
------------
GROUNDWATER CONFIGURATION
Groundwater method (water):                                               None
------------
EARTHQUAKE LOADING
Horizontal pseudo-acceleration coefficient (dimensionless)(eq):          0.150
------------
LIMIT-EQUILIBRIUM METHOD
Analysis method (method):                                               Bishop
------------
SEARCH METHOD (srch)                                                       box
POTENTIAL FAILURE SIZE CONTROLS
Primary constraint, volume or area (vacriterion):                       Volume
Surface area is not a criterion for size restriction.
Volume range of potential failures (m ^3)(vmin, vmax):     5.000E+02 5.000E+03
Tolerance amount for initial potential failure (tol):                5.000E+01
Minimum number of active columns in potential failure required,
      otherwise error message generated (limcol):                          100
SLIP DIRECTIONS
Interval to search slip directions on each side of overall 
 fall direction of potential failure, in degrees (degmax):               0.000
Increment amount for slip direction, in degrees (deginc):                0.000
Calculated number of slip directions tested for each lattice node:           1
SEARCH-LATTICE EXTENT AND RESOLUTION
VERTICAL EXTENT AND RESOLUTION
Minimum elevation of search-lattice nodes (m ) (zsmin):                 40.000
Maximum elevation of search-lattice nodes (m ) (zsmax):                 55.000
Search-lattice vertical spacing (m ) (zsrchres):                         0.250
Increment amount for potential failure surface sphere radius(m )(dr):    0.500
HORIZONTAL EXTENT AND RESOLUTION
Starting search-lattice horizontal node (ismin,jsmin):                 20   51
Ending search-lattice horizontal node (ismax,jsmax):                   40   51
Horizontal spacing - multiple of DEM resolution (nsrchres):                  1
COARSE-TO-FINE SEARCH PARAMETERS
Horizontal and vertical multiplier for initial coarse search (multres):      2
Search iteration tolerance - percent change F (fostol):                 0.0100
------------
ADDITIONAL OUTPUT FILES AND PARAMETERS
Create new DEM file (remove):                                                M
   (surface with minimum F<foscut removed)
F cutoff for removing material from new DEM (foscut):                1.000E+01

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
III. OUTPUT FILES GENERATED: 

     LOCATION FOR OUTPUT FILES:
          J_emb10nonhomogeq_output/                                                                                                                                                                               

      J_emb10nonhomogeq_out.txt
      J_emb10nonhomogeq_errors_out.txt
      J_emb10nonhomogeq_slope_out.asc
        Range: [    0.0000,   26.5651]
      J_emb10nonhomogeq_fos3d_out.asc
        Range: [    1.0890,    1.2677]
      J_emb10nonhomogeq_ordfos3d_out.asc
        Range: [    0.9800,    1.1990]
      J_emb10nonhomogeq_fosvol_out.asc
        Range: [  1.5322E+03,  4.9918E+03]
      J_emb10nonhomogeq_spheres_out.okc

     Optional files generated:
      J_emb10nonhomogeq_newDEM_out.asc
        Range: [    23.6528,    35.0000]

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
IV. RESULTS:
Number of trial surfaces tried:                                           6366
F < foscut found and newDEM_out file created?                              yes
------------
3D POTENTIAL FAILURE - GLOBAL MINIMUM
Bishop's 3D factor of safety:                                           1.0890
Ordinary 3D factor of safety:                                           0.9802
Volume (m ^3):                                                     1.53744E+03
Horizontal surface area (m ^2):                                    5.20755E+02
Slip surface area (m ^2):                                          6.52381E+02
Weight (kg):                                                       2.99802E+04
Number of active columns:                                                 2122
        x-center         y-center          z-center     radius
         14.2500           25.2500           44.0000   2.03472E+01
Slip direction, relative to search lattice:                           180.0000
End date and time: 03/13/2015  17:05:04
