    *************************************************************
                               Scoops3D
          3D Slope Stability Throughout a Digital Landscape
                        U.S. Geological Survey
                             Version: 1.0                                               
    *************************************************************


This file: K_conehi_output/K_conehi_out.txt                                                                                                                                                                                            

Start date and time: 03/13/2015  16:59:02
Description: Scoops3D example K; 30 degree cone, lambda = 1.0                                                                        

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I. INPUT FILES:
  DEM file: input/cone1000DEM.asc                                                                                                                                                                                                       
  Main parameter input file: K_conehi.scp                                                                                                                                                                                            

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
II. SIMULATION PARAMETERS:
------------
DEM
Input file for topography: input/cone1000DEM.asc                                                                                                                                                                                                       
  Dimensions of DEM grid (x,y):                                       97    97
  Number of cells in DEM grid:                                            9409
  Number of non-null cells in DEM grid:                                   9409
  Horizontal resolution of DEM grid (m ):                                43.30
  Minimum elevation of DEM (m ):                                         0.000
  Maximum elevation of DEM (m ):                                      1000.000
  xllcorner and yllcorner (m ):                           0.000          0.000
------------
UNIT DESCRIPTORS (used for labels in output files)
lengthunits   ceeunits    gammaunits
     m          kPa         kN/m^3  
------------
MATERIAL PROPERTIES
Property method:                                                         layer
Number of layers (nmat):                                                     1
                      total unit wt.  
lnum    cee     phi      gamt  
        kPa             kN/m^3  
  1  17630.00  40.000   21.000 
------------
GROUNDWATER CONFIGURATION
Groundwater method (water):                                               None
------------
EARTHQUAKE LOADING
Horizontal pseudo-acceleration coefficient (dimensionless)(eq):          0.000
------------
LIMIT-EQUILIBRIUM METHOD
Analysis method (method):                                               Bishop
------------
SEARCH METHOD (srch)                                                       box
POTENTIAL FAILURE SIZE CONTROLS
Primary constraint, volume or area (vacriterion):                       Volume
Surface area is not a criterion for size restriction.
Volume range of potential failures (m ^3)(vmin, vmax):     1.000E+07 1.000E+10
Tolerance amount for initial potential failure (tol):                1.000E+06
Minimum number of active columns in potential failure required,
      otherwise error message generated (limcol):                          200
SLIP DIRECTIONS
Interval to search slip directions on each side of overall 
 fall direction of potential failure, in degrees (degmax):               0.000
Increment amount for slip direction, in degrees (deginc):                0.000
Calculated number of slip directions tested for each lattice node:           1
SEARCH-LATTICE EXTENT AND RESOLUTION
VERTICAL EXTENT AND RESOLUTION
Minimum elevation of search-lattice nodes (m ) (zsmin):               1000.000
Maximum elevation of search-lattice nodes (m ) (zsmax):               2000.000
Search-lattice vertical spacing (m ) (zsrchres):                        22.000
Increment amount for potential failure surface sphere radius(m )(dr):   22.000
HORIZONTAL EXTENT AND RESOLUTION
Starting search-lattice horizontal node (ismin,jsmin):                  1   49
Ending search-lattice horizontal node (ismax,jsmax):                   49   49
Horizontal spacing - multiple of DEM resolution (nsrchres):                  1
COARSE-TO-FINE SEARCH PARAMETERS
Horizontal and vertical multiplier for initial coarse search (multres):      8
Search iteration tolerance - percent change F (fostol):                 0.1000
------------
ADDITIONAL OUTPUT FILES AND PARAMETERS
isqout (search quality files):                                               1
Create new DEM file (remove):                                                M
   (surface with minimum F<foscut removed)
F cutoff for removing material from new DEM (foscut):                1.200E+01

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
III. OUTPUT FILES GENERATED: 

     LOCATION FOR OUTPUT FILES:
          K_conehi_output/                                                                                                                                                                                        

      K_conehi_out.txt
      K_conehi_errors_out.txt
      K_conehi_slope_out.asc
        Range: [    0.0000,   29.9978]
      K_conehi_fos3d_out.asc
        Range: [   11.1634,  100.0000]
      K_conehi_ordfos3d_out.asc
        Range: [   10.8455,  100.0000]
      K_conehi_fosvol_out.asc
        Range: [  1.2680E+09,  9.9492E+09]
      K_conehi_spheres_out.okc

     Optional files generated:
      K_conehi_newDEM_out.asc
        Range: [  -200.1216,   815.7199]
      K_conehi_numcols_out.asc
        Range: [ 1840, 7433]
      K_conehi_critcheck_out.asc
      K_conehi_boundcheck_out.asc
      K_conehi_ncolerr_out.txt
      K_conehi_searchgrid_out.asc

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
IV. RESULTS:
Number of trial surfaces tried:                                          62825
F < foscut found and newDEM_out file created?                              yes
Number of surfaces with active column totals less than limcol:            3320
     Check file ncolerr_out for detailed information.
------------
3D POTENTIAL FAILURE - GLOBAL MINIMUM
Bishop's 3D factor of safety:                                          11.1634
Ordinary 3D factor of safety:                                          10.8663
Volume (m ^3):                                                     1.28764E+09
Horizontal surface area (m ^2):                                    3.47575E+06
Slip surface area (m ^2):                                          4.33400E+06
Weight (kg):                                                       2.70404E+10
Number of active columns:                                                 1893
        x-center         y-center          z-center     radius
        930.9801         2100.1179         1352.0000   1.55212E+03
Slip direction, relative to search lattice:                           180.0000
End date and time: 03/13/2015  16:59:54
