    *************************************************************
                               Scoops3D
          3D Slope Stability Throughout a Digital Landscape
                        U.S. Geological Survey
                             Version: 1.0                                               
    *************************************************************


This file: O_conemedru_output/O_conemedru_out.txt                                                                                                                                                                                      

Start date and time: 03/13/2015  17:04:12
Description: Scoops3D example O; 30 degree cone, lambda = 0.125, ru = 0.2                                                            

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I. INPUT FILES:
  DEM file: input/cone1000DEM.asc                                                                                                                                                                                                       
  Main parameter input file: O_conemedru.scp                                                                                                                                                                                         

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
II. SIMULATION PARAMETERS:
------------
DEM
Input file for topography: input/cone1000DEM.asc                                                                                                                                                                                                       
  Dimensions of DEM grid (x,y):                                       97    97
  Number of cells in DEM grid:                                            9409
  Number of non-null cells in DEM grid:                                   9409
  Horizontal resolution of DEM grid (m ):                                43.30
  Minimum elevation of DEM (m ):                                         0.000
  Maximum elevation of DEM (m ):                                      1000.000
  xllcorner and yllcorner (m ):                           0.000          0.000
------------
UNIT DESCRIPTORS (used for labels in output files)
lengthunits   ceeunits    gammaunits
     m          kPa         kN/m^3  
------------
MATERIAL PROPERTIES
Property method:                                                         layer
Number of layers (nmat):                                                     1
                      total unit wt.  
lnum    cee     phi      gamt      ru
        kPa             kN/m^3  
  1   1444.00  30.000   20.000    0.200 
------------
GROUNDWATER CONFIGURATION
Groundwater method (water):                                                 Ru
  See material properties for Ru values in each material
------------
EARTHQUAKE LOADING
Horizontal pseudo-acceleration coefficient (dimensionless)(eq):          0.000
------------
LIMIT-EQUILIBRIUM METHOD
Analysis method (method):                                               Bishop
------------
SEARCH METHOD (srch)                                                       box
POTENTIAL FAILURE SIZE CONTROLS
Primary constraint, volume or area (vacriterion):                       Volume
Surface area is not a criterion for size restriction.
Volume range of potential failures (m ^3)(vmin, vmax):     1.000E+06 1.000E+09
Tolerance amount for initial potential failure (tol):                1.000E+05
Minimum number of active columns in potential failure required,
      otherwise error message generated (limcol):                          200
SLIP DIRECTIONS
Interval to search slip directions on each side of overall 
 fall direction of potential failure, in degrees (degmax):               0.000
Increment amount for slip direction, in degrees (deginc):                0.000
Calculated number of slip directions tested for each lattice node:           1
SEARCH-LATTICE EXTENT AND RESOLUTION
VERTICAL EXTENT AND RESOLUTION
Minimum elevation of search-lattice nodes (m ) (zsmin):               1200.000
Maximum elevation of search-lattice nodes (m ) (zsmax):               2200.000
Search-lattice vertical spacing (m ) (zsrchres):                        22.000
Increment amount for potential failure surface sphere radius(m )(dr):   22.000
HORIZONTAL EXTENT AND RESOLUTION
Starting search-lattice horizontal node (ismin,jsmin):                  1   49
Ending search-lattice horizontal node (ismax,jsmax):                   49   49
Horizontal spacing - multiple of DEM resolution (nsrchres):                  1
COARSE-TO-FINE SEARCH PARAMETERS
Horizontal and vertical multiplier for initial coarse search (multres):      8
Search iteration tolerance - percent change F (fostol):                 0.1000
------------
ADDITIONAL OUTPUT FILES AND PARAMETERS
isqout (search quality files):                                               1
Create new DEM file (remove):                                                M
   (surface with minimum F<foscut removed)
F cutoff for removing material from new DEM (foscut):                1.000E+01

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
III. OUTPUT FILES GENERATED: 

     LOCATION FOR OUTPUT FILES:
          O_conemedru_output/                                                                                                                                                                                     

      O_conemedru_out.txt
      O_conemedru_errors_out.txt
      O_conemedru_slope_out.asc
        Range: [    0.0000,   29.9978]
      O_conemedru_fos3d_out.asc
        Range: [    1.9636,  100.0000]
      O_conemedru_ordfos3d_out.asc
        Range: [    1.8385,  100.0000]
      O_conemedru_fosvol_out.asc
        Range: [  5.7983E+08,  9.9984E+08]
      O_conemedru_spheres_out.okc

     Optional files generated:
      O_conemedru_newDEM_out.asc
        Range: [   -39.9946,   925.0000]
      O_conemedru_numcols_out.asc
        Range: [ 1335, 1958]
      O_conemedru_critcheck_out.asc
      O_conemedru_boundcheck_out.asc
      O_conemedru_ncolerr_out.txt
      O_conemedru_searchgrid_out.asc

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
IV. RESULTS:
Number of trial surfaces tried:                                          22637
F < foscut found and newDEM_out file created?                              yes
Number of surfaces with active column totals less than limcol:            3798
     Check file ncolerr_out for detailed information.
------------
3D POTENTIAL FAILURE - GLOBAL MINIMUM
Bishop's 3D factor of safety:                                           1.9636
Ordinary 3D factor of safety:                                           1.8498
Volume (m ^3):                                                     5.83491E+08
Horizontal surface area (m ^2):                                    2.44481E+06
Slip surface area (m ^2):                                          2.93673E+06
Weight (kg):                                                       1.16698E+10
Number of active columns:                                                 1335
        x-center         y-center          z-center     radius
        671.1717         2100.1179         1662.0000   1.70199E+03
Slip direction, relative to search lattice:                           180.0000
End date and time: 03/13/2015  17:04:21
